CARPET CLEANING RINSE

Product Description

Rinse Pro is a unique dual purpose acid rinse which delivers powerful cleaning whilst at the same time providing the traditional pH neutralisation. This powerful cleaning action is the ideal answer for tackling heavily soiled wool carpets where the use of an alkaline emulsifier is far from ideal. Whilst rinsing away prespray residues and buffering the carpet or upholstery to a slightly acid pH level it also imparts effective anti-resoiling properties, stabilizes the dyes and helps protect the fibre itself.

Colour: Blue
pH: 4
Fragrance: Fruity
Dilution: 1:100 to 1:300
Safety profile: Ready to use
Pack sizes: 5Lt & 20Lt

BENEFITS

Unique Cleaning Chemistry – Provides full strength cleaning power normally only associated with alkaline extraction detergents.
Polymer Anti-Resoiling Technology – Unique polymer technology dramatically enhances suspended soil removal whilst providing excellent anti-resoiling action.
Wool Friendly Action – Rinse Pro exceeds the requirements for the safe cleaning of wool carpeting. It has been carefully engineered to maximise cleaning on both woollen and synthetic fibres (including 5th generation nylon), giving you total peace-of-mind.
Fibre Protection – Rinse Pro stabilizes delicate dyes, helps prevent cellulosic browning and protects the fibre itself during the cleaning process. It provides excellent preparation for the application of a carpet or fabric protector.
A Versatile Choice – Due it’s broad spectrum of performance features, it is ideal for use on both carpet, delicate area rugs and upholstery. It is ideally suited for use in the single step cleaning/extraction method or following the prespray treatment in the two-step method.
A Pleasure to Use – Rinse Pro is ideal for use in both portable and truck mounted equipment & contains specialty corrosion inhibitors to protect brass and copper components. It has a very low toxicity level and fragrances the area being cleaned with a fresh scent.

APPLICATION AREAS AND SURFACE SUITABILITY

Rinse Pro is ideal for use on all wool, synthetic fabrics and carpet.

HOW TO USE

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.

DILUTIONS

Portable Extractors

Mix 100ml /10Lt (1:100) when cleaning using the single step process.
Mix 30 to 50ml / 10Lt (1:300 to 1:200) when cleaning using the two-step process.

Truck Mounted Extractors

Mix 300ml per 10Lt water to make the truck mount concentrate.
Set the flow meter at 2 to 4 gallons per hour.

APPLICATION

Single-step cleaning method.
(Light to medium soiling)

Prepare the carpet by thoroughly vacuuming the area to be cleaned.
Using the dilution rates specified above clean/extract the carpet or upholstery fabric using slightly overlapping strokes.
Apply protector if required.
Realign the carpet or upholstery fabric fibres and assist the drying process.

Two-step cleaning method.
(Medium to heavy soiling)

Prepare the carpet by thoroughly vacuuming the area to be cleaned and applying the relevant prespray treatment, providing the suggested dwell time and agitation.
Using the dilution rates specified above, rinse extract the carpet or upholstery fabric using slightly overlapping strokes.
Apply protector if required.
Realign the carpet or upholstery fabric fibres and assist the drying process.

Safety Data Sheet