MethSan (B) Foam Boost – 5L

Key Features:

• Type:Foam cleaner
• Suitable For:Various surfaces and materials (consult the product label for specific use recommendations)

Directions for Use:

For General Cleaning:

1. Preparation:
   • Test First:Always perform a spot test on an inconspicuous area to ensure that MethSan (B) Foam Boost is compatible with the material and does not cause damage.
   • Surface:Ensure the surface to be cleaned is free of loose debris and dust. This helps the foam adhere better and improves cleaning efficiency.
2. Application:
   • Shake:Shake the canister thoroughly before use to ensure the foam is well-mixed and effective.
   • Position:Hold the canister upright and spray the foam directly onto the surface from approximately 15-20 cm (6-8 inches).
   • Coverage:Apply a generous, even layer of foam to cover the entire area that requires cleaning. Ensure that all soiled areas are adequately covered.
3. Cleaning:
   • Dwell Time:Allow the foam to sit and penetrate the surface for the duration specified on the product label. This helps the foam to break down dirt, grime, and grease effectively.
   • Agitation:Use a brush, cloth, or sponge to work the foam into the surface, focusing on any stubborn stains or heavily soiled areas. This helps to lift and dislodge contaminants.
   • Wipe:Wipe away the foam and loosened dirt with a clean, damp cloth or sponge. For best results, use a cloth that absorbs moisture well to remove residues efficiently.
4. Rinsing:
   • Rinse or Wipe:Depending on the type of surface and the extent of cleaning required, you may need to rinse the area with water or simply wipe it down with a damp cloth to remove any remaining foam.
5. Drying:
   • Dry:Allow the surface to air dry completely. For quicker results, use a clean, dry cloth to assist in drying and to remove any remaining moisture.

For Best Results:

• Preparation:Perform a spot test to ensure compatibility with the material before full application.
• Application:Apply the foam evenly and generously to ensure thorough coverage and effective cleaning.
• Agitation:Use appropriate tools to work the foam into the surface, particularly in areas with heavy soil or stains.
• Surface Compatibility:Verify the suitability of MethSan (B) Foam Boost for the surface material by consulting the product label.
• Final Cleaning:Rinse or wipe down the surface thoroughly to ensure that no foam residue remains.

By following these steps, MethSan (B) Foam Boost will deliver superior cleaning performance, effectively removing dirt and stains while leaving surfaces clean and refreshed.