Advanced Peroxide Cleaner is a revolutionary hydrogen peroxide based cleaner. It is created using innovative chemistry and a unique manufacturing process.
The proprietary formulation releases the maximum oxidation potential of Fiberlock’s Advanced Peroxide Cleaner. This allows for a lower concentration product that is not DOT regulated. The end result is a product that provides performance unmatched by any other peroxide based cleaners.
Directions:
Always test textiles and fabrics for color stability in an inconspicuous area prior to use.
Advanced Peroxide Cleaner can be applied with a trigger or pump sprayer, airless spray or mop/brush. When applying, saturate the affected material with enough product to remain wet for at least 10 minutes. Special Note: Only add Advanced Peroxide Cleaner to application equipment that is clean and free of dirt and debris. Additionally, never return unused material to the original container that the Advanced Peroxide Cleaner came from. Instead, dispose of it properly according to all Federal, State and Local regulations.
- Provide Advanced Peroxide Cleaner enough time to work its way into the substrate and lift inanimate contaminants out through the foaming action. The dwell time will depend on the thickness and porosity of the substrate but is usually 5 to 10 minutes.
- After a layer of foam has developed agitation will assist in removing more debris. Use a stiff nylon bristle brush to fully agitate the surface.
- As Advanced Peroxide Cleaner dwells on the surface it will continue to lift debris and remove staining.
- A second application of Advanced Peroxide Cleaner may be necessary in order to achieve the desired results.
- Before Advanced Peroxide Cleaner dries the surface should be thoroughly wiped clean. The full brightening effects will be seen within 24 hours as the surface dries. After cleaning, disinfect with ShockWave or ShockWave RTU.
Coverage: 500 ft2 per gallon on porous surfaces and up to 1200 ft2 per gallon on non-porous surfaces. Note that coverage rates are approximate and depend on how heavily the Advanced Peroxide Cleaner is applied to the substrate.
Storage:Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Store securely closed and upright in original container. Vented cap can leak if container is placed on side. Do not store in direct sunlight as this will reduce the potency of the product. Avoid shipping or storing below freezing or above 100°F. If product freezes, thaw at room temperature and shake gently to remix components. Store in locked area inaccessible to children.
Disposal: Dispose of contents/container in accordance with all local, state, and federal regulations.
Contains: Water (7732-18-5), Hydrogen Peroxide (7722-84-1), Primary Alcohol Ethoxylate C9 (68439-46-3), Sodium Octane Sulfonate (5324-84-5), Proprietary Chelating Agent (N/A).
CAUTION! KEEP OUT OF REACH OF CHILDREN.FOR PROFESSIONAL USE ONLY.
24 hour Emergency “CHEM-TEL” – 1-800-255-3924
Always take care to avoid skin and eye contact by using protective measures such as nitrile rubber gloves (or equivalent) and safety glasses. Do not take internally. Close container after each use. Keep from freezing. Do not return unused product to the original container.
For Technical Information call 800.342.3755
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of this product are beyond our control. Neither ICP Construction, Inc., nor its agents shall be responsible for the use of this product or any procedures or apparatus mentioned. We recommend that the prospective user determine the suitability of this product, for each specific project and for the health and safety of personnel working in the area.
For additional information check Safety Data Sheet or Product Data Sheet available online at: www.fiberlock.com.
IAQ, the IAQ Logo and other marks in this literature are trademarks of ICP Construction, Inc.
FIBERLOCK ADVANCED PEROXIDE CLEANER 8314WARNING | ATTENTION
- H315 – Causes skin irritation.
- H315 – Provoque une irritation cutanée.
- H319 – Causes serious eye irritation.
- H319 – Provoque une sévère irritation des yeux.
- H335 – May cause respiratory irritation.
- H335 – Peut irriter les voies respiratoires.
Use only outdoors or in a well-ventilated area.; Avoid breathing mist/vapours/spray.; Wear protective gloves/protective clothing/eye protection/face protection.; See SDS for full list of P phrases
Used for: Removing stains from Mould and Mildew
Chemical Type: Peroxide
Available in 2.5 Gallon Containers
Reviews
There are no reviews yet.