Enzyme cleaners earn their place when the soil is organic: urine, vomit, flood protein, food spills and the odours that hang around after the visible stain is gone. Surfactants lift dirt. Disinfectants act on contact where labelled. An enzyme cleaner digests the organic molecules that keep smelling after both of those steps.
This guide is for Australian restoration and carpet crews choosing enzymatic chemistry for real jobs. Soft links are to in-stock Restoration Warehouse products. Follow each label and SDS — contact times and claims are not invented here.
What an enzyme cleaner actually does
Enzymatic formulas use biological catalysts to break down proteins, fats and starches so they rinse or extract away. That is why they show up on pet urine, organic flood residues and kitchen soils where detergent alone leaves a ghost odour. They need dwell time and moisture. Extreme pH cleaners can denature enzymes if you stack chemistry carelessly. They do not replace extraction on heavy urine wicks, and they do not automatically deliver a TGA hospital-grade disinfection claim.
Start with the soil, not the brand
Map the reservoir first — UV or moisture readings beat guessing from the stain you can see. Remove bulk soil by extraction or blotting, then apply enzyme and keep it moist for the labelled dwell. Extract or rinse as directed, then dry the structure so the pad is not still wet next morning. If mould or Category 3 work is in scope, run your listed disinfectant protocol separately from the enzyme step.
Actichem enzyme options
See the Actichem enzyme cleaners below.
Actichem Deozyme Enzyme-based odour neutraliser that breaks down organic contamination and eliminates persistent smells on carpets, fabrics and hard surfaces. It suits carpets, fabrics and hard surfaces where organic odour is the complaint, not just surface dirt.
Actichem Deozyme Plus Actichem Deozyme Plus Reach for Plus when urine and organic load are heavier and standard digesters are not enough.
Broader enzyme and pet urine chemistry
Sonitron Sonizyme Liquid Enzyme Cleaner Liquid enzyme cleaner that breaks down protein based stains and organic soils for effective removal from carpets and upholstery. Use it where protein soils need to break down into rinseable form during carpet and upholstery work.
Odorx Un-duz-it Unleashed Pet Urine Odour & Stain Remover Enzyme and oxidiser-based cleaner that removes pet urine odours and stains from carpet, upholstery and water-cleanable porous surfaces in one-hour application. It combines oxidisers, enzymes and encapsulation for pet urine jobs — still pair it with thorough flushing, not perfume-over-soil.
Actichem Pet & Flood Thymox Actichem Pet & Flood Thymox is a professional urine decontaminant and odour neutraliser combining advanced Thymox antimicrobial technology with powerful urine crystal dissolution and stain removal performance. Ideal for restoration, carpet cleaning, flood remediation, and severe pet odour treatment applications. It sits in Actichem’s pet and flood range when urine crystals and severe odour need a dedicated decontaminant, not a general carpet shampoo.
Where enzymes sit in the job
On water losses, enzymes sit after bulk extraction and beside your drying plan. On carpet days they sit after you remove the reservoir and before grooming and dry. For vapour control after the source is addressed, see how to choose an odour neutraliser.
On-site method that survives a claim file
- Map the wick with UV or meters, not only the stain you can see.
- Remove bulk soil by extraction or blotting.
- Apply enzyme evenly and keep it moist for the labelled dwell.
- Extract or rinse as the label directs.
- Dry the structure so the pad is not still wet next morning.
Choosing between these products
Deozyme is the everyday enzyme odour digester for organic soils. Deozyme Plus steps up for heavier urine and organic decontamination. Sonizyme is a liquid enzyme cleaner aimed at protein soils on carpet and upholstery. Un-duz-it Unleashed is built specifically for pet urine odour and stain work. Thymox belongs when pet/flood urine decontamination is the primary scope. Stock what matches your job mix — most vans need one everyday enzyme and one urine specialist, not five half-used jugs.
What to look for when you buy
- A clear job fit on the label — soil type, surface and method stated plainly
- Dilution or ready-to-use directions you can measure on site
- Surface limits called out up front (stone, aluminium, dyes, sealed timber, electronics)
- An SDS the crew can read before the first spray or start-up
- Pack size that matches your real burn rate, not a one-off emergency buy
Common mistakes
Crews lose time when they skip a test patch, mix by eye, or expect one product to cover every soil. Another frequent miss: finishing chemistry before extraction or drying is under control, then blaming the chemical when the odour or soil returns. Match the product to the job stage, then document what you used.
Australian site realities
Power, water access, occupied buildings and insurer paperwork shape the choice as much as the catalogue page. A strong product still fails if you cannot rinse, extract or ventilate on the day. Stock the van for the jobs you actually win in your region, and keep a ranked consumables list so the first truck is not hunting supplies at 7 pm.
Temperature and dew point matter. Hot tin roofs, cold slabs and air-conditioned interiors change dwell times and drying behaviour. If the label gives a temperature range, respect it. If surface temperature is close to dew point, fix the air before you chase more chemistry.
Documentation that protects the crew
Photograph before and after. Note product name, dilution and pack used. Record moisture or hygiene readings when they justify scope. Clients and insurers ask later; memory is not a system.
When to stop or escalate
Stop if the surface is unidentified, colour bleeds on a test patch, a warranty demands a method you do not have, or contamination exceeds your PPE and disposal setup. Selling the right next visit beats forcing the wrong product on enzyme cleaner.
Pair this guide with live structural drying and moisture meter posts on restorationwarehouse.com.au when the job crosses those topics.
Bottom line
Get the enzyme cleaner decision right for the soil, the surface and the site constraints. Follow the live product page and SDS — not forum dilution folklore. Restoration Warehouse stocks the options linked above for Australian restoration and cleaning crews. Check live stock and current directions on each product page before you order; nothing here invents prices, kill claims or specs beyond those pages.
Van and depot discipline
Label concentrates and decants with name, dilution and date. Keep SDS with the product. Rotate older stock forward. If a pack arrives without a readable label, quarantine it — guessing chemistry or meter settings on a customer site is how claims start. Photograph label packs for the job folder when insurers ask what was used.
Training note for new technicians
Walk a new technician through one labelled mix or machine set-up under supervision before they work unsupervised. Have them write dilution, pad type or meter mode on the bottle or job sheet. A one-minute test patch on an inconspicuous area prevents most chemistry and finish mistakes. When the client or insurer asks what was used, a photo of the label pack in the job folder answers faster than memory.
Why the live product page beats forum tips
Forum dilution folklore and “we always run it neat” habits create damaged stone, bleeding carpet, burnt finishes and failed clearance cleans. The live Restoration Warehouse product page and the SDS are the authority for this catalogue. If a direction is unclear, ask before you spray, burnish or sample — a boring question is cheaper than a floor claim.
Procurement for owners and managers
Buy for a realistic two-week burn rate, not a single emergency. Split stock between depot and vehicles so storm nights do not empty the shelf. Prefer products with clear Australian SDS access and local replenishment through Restoration Warehouse rather than one-off unknown imports with no support. Re-check the live product page before promising a client a specific unit — stock and pack sizes move.