A floor sealer locks in the finish after cleaning or stripping. Choose poorly and you get peel, haze, wrong slip rating or a film that will not bond to the prepared floor.
This guide is for Australian hard-floor crews. Soft links are to Actichem Defender sealer options stocked at Restoration Warehouse.
Sealer after prep — not instead of prep
Sealers need a clean, dry, compatible base. Strip or deep clean first. Residue from stripper or detergent is a common cause of failure. Match sealer chemistry to floor type: resilient, stone and timber systems are not interchangeable.
Defender sealer options
Actichem Defender CSD Pure Defender CSD Pure CSD Pure suits programmes that specify the Pure variant of Actichem’s Defender CSD line — confirm substrate notes on the live page.
Actichem Defender CSD Defender CSD Standard Defender CSD is the core CSD option when Pure is not required.
Actichem Defender WB Defender WB Water-based Defender WB fits jobs where a WB system is specified for odour or site constraints.
Defender SV Defender SV Defender SV covers solvent-side Defender needs when the specification calls for SV rather than WB or CSD.
How to choose between CSD, WB and SV
Read the job specification and the floor manufacturer’s guidance. Occupied buildings often prefer lower-odour water-based systems; some commercial finishes still specify solvent. Coverage rates, recoat windows and slip expectations belong in the quote, not as afterthoughts.
On-site method that survives a claim file
- Confirm floor type and required sealer system.
- Complete strip/clean; rinse and dry to spec.
- Apply thin, even coats per label.
- Respect recoat and cure times.
- Control traffic until the floor is ready.
What to look for when you buy
- A clear job fit on the label — soil type, surface and method stated plainly
- Dilution or ready-to-use directions you can measure on site
- Surface limits called out up front (stone, aluminium, dyes, sealed timber, electronics)
- An SDS the crew can read before the first spray or start-up
- Pack size that matches your real burn rate, not a one-off emergency buy
Common mistakes
Crews lose time when they skip a test patch, mix by eye, or expect one product to cover every soil. Another frequent miss: finishing chemistry before extraction or drying is under control, then blaming the chemical when the odour or soil returns. Match the product to the job stage, then document what you used.
Australian site realities
Power, water access, occupied buildings and insurer paperwork shape the choice as much as the catalogue page. A strong product still fails if you cannot rinse, extract or ventilate on the day. Stock the van for the jobs you actually win in your region, and keep a ranked consumables list so the first truck is not hunting supplies at 7 pm.
Temperature and dew point matter. Hot tin roofs, cold slabs and air-conditioned interiors change dwell times and drying behaviour. If the label gives a temperature range, respect it. If surface temperature is close to dew point, fix the air before you chase more chemistry.
Documentation that protects the crew
Photograph before and after. Note product name, dilution and pack used. Record moisture or hygiene readings when they justify scope. Clients and insurers ask later; memory is not a system.
When to stop or escalate
Stop if the surface is unidentified, colour bleeds on a test patch, a warranty demands a method you do not have, or contamination exceeds your PPE and disposal setup. Selling the right next visit beats forcing the wrong product on floor sealer.
Coat weight and slip expectations
Thin, even coats beat heavy single pours. Heavy coats soft-cure, scuff and trap solvent. Agree the slip expectation with the client before you promise gloss: some sites need a maintained satin, not a mirror. Match Defender CSD, WB or SV to the written spec. If the floor was flooded or fire-damaged, confirm the substrate is sound and dry enough for film forming — sealer will not glue a failing screed together.
Safety and PPE baseline
Read the SDS before the first use of any concentrate or reactive kit. Eye protection and gloves suited to the chemistry are minimum for wet work; hearing and dust controls matter on machines. Keep pedestrians out of wet or stripped floors. For meters and carbide kits, treat reagents and pressurised vessels with the respect the manufacturer documents — shortcuts invent readings and incidents.
One more check before you leave site
Walk the job once more with wet floors, open lids and running machines in mind. Confirm labelled bottles are capped, meters are logged, and the client knows any cure or re-entry times. A five-minute close-out prevents most afternoon call-backs on this class of work.
Keep SDS packs with the products they belong to, and photograph label packs for the claim file when insurers ask what chemistry or machine was used.
Bottom line
Get the floor sealer decision right for the soil, the surface and the site constraints. Follow the live product page and SDS — not forum dilution folklore. Restoration Warehouse stocks the options linked above for Australian restoration and cleaning crews. Check live stock and current directions on each product page before you order; nothing here invents prices, kill claims or specs beyond those pages.
Van and depot discipline
Label concentrates and decants with name, dilution and date. Keep SDS with the product. Rotate older stock forward. If a pack arrives without a readable label, quarantine it — guessing chemistry or meter settings on a customer site is how claims start. Photograph label packs for the job folder when insurers ask what was used.
Training note for new technicians
Walk a new technician through one labelled mix or machine set-up under supervision before they work unsupervised. Have them write dilution, pad type or meter mode on the bottle or job sheet. A one-minute test patch on an inconspicuous area prevents most chemistry and finish mistakes. When the client or insurer asks what was used, a photo of the label pack in the job folder answers faster than memory.
Why the live product page beats forum tips
Forum dilution folklore and “we always run it neat” habits create damaged stone, bleeding carpet, burnt finishes and failed clearance cleans. The live Restoration Warehouse product page and the SDS are the authority for this catalogue. If a direction is unclear, ask before you spray, burnish or sample — a boring question is cheaper than a floor claim.
Procurement for owners and managers
Buy for a realistic two-week burn rate, not a single emergency. Split stock between depot and vehicles so storm nights do not empty the shelf. Prefer products with clear Australian SDS access and local replenishment through Restoration Warehouse rather than one-off unknown imports with no support. Re-check the live product page before promising a client a specific unit — stock and pack sizes move.
Related gear on the same van
Most floor sealer jobs fail because the supporting kit is missing: rinse water, recovery, PPE, meters or the next chemistry step. Build the kit as a system. Soft-sell only what you will actually use next week, and keep SDS packs with the concentrates or machines they belong to.