Skip to main content
Account Cart 0
Restoration Advice

How to Choose a Heavy Duty Degreaser for Restoration and Workshop Cleaning

Actichem Aquasolve, Hammersley HD Degreaser and Hammersley Aquatron degreaser jerrycans on white

Degreaser is one of those products every crew owns and few crews think about. There’s a jerrycan in the depot, someone tips it into a bucket at whatever strength looks right, and the job gets done. Until it doesn’t: the soot smears instead of lifting, the floor is left tacky, or a strong caustic cleaner marks an aluminium frame or a painted panel.

Picking the right degreaser is mostly about three things: what kind of soil you’re removing, what surface it’s sitting on, and where the wash water ends up. This guide is for Australian restoration crews, carpet and hard floor cleaners, and anyone maintaining a workshop or equipment fleet. It covers the main types of heavy duty degreaser, how to read dilution rates and pH, and which products suit fire jobs, floors, machinery and parts.

What a degreaser actually does

Grease, oil, carbon and soot don’t mix with plain water. A degreaser uses surfactants, alkalinity, solvents or a mix of them to break that soil down and hold it in suspension so it can be rinsed or wiped away. The difference between products is how hard they push, and what they push against.

  • Alkaline (caustic) degreasers use high pH to break down fats, oils and baked-on carbon. They work fast, but the strongest ones are corrosive and need care around skin, aluminium and sensitive finishes.
  • Water based, non-caustic degreasers rely more on surfactants and, in some cases, citrus or plant-derived solvents. They are generally gentler to handle and suit regular floor, machinery and general surface work.
  • Solvent degreasers dissolve oil and evaporate. Brake and parts cleaners are the common example. They’re for components and in-place cleaning, not mopping floors.
  • Plant-based restoration degreasers are built for occupied buildings and fire and smoke jobs, where low odour and no harsh residue matter as much as cleaning power.

Start with the soil, not the brand

Before you choose a product, look at what you’re cleaning off.

Soot, smoke residue and fire jobs

Soot is oily, fine and easily smeared. On walls, ceilings and contents you want a degreaser that lifts it with minimal scrubbing, because heavy agitation drives residue into the surface. You’re also often working inside a home the family wants back quickly, so odour and residue count.

Benefect Atomic Degreaser is a plant-based concentrate made for restoration work. RW’s product page lists fire and smoke damage restoration on walls, floors and contents, water damage surface preparation and removal of filtration lines around doorways, baseboards and vents among its uses. It’s solvent-free and VOC-free, with no added fragrances, dyes or petrochemicals, and Benefect positions it for occupied environments.

Actichem Aquasolve is a caustic-free degreaser that lists fire restoration and soot removal, duct and ventilation cleaning and industrial degreasing among its applications. It’s low foaming, can be applied by hand, spray or machine, and is compatible with steam cleaning systems. Note the limits on the label: it is not suitable for aluminium, non-ferrous metals or polymer coated flooring.

If the job also has a smoke odour problem, degreasing is the first step, not the last. Our guide on how to choose an odour neutraliser covers what comes after the surfaces are clean.

Oil, grease and carbon on floors and machinery

Workshop floors, plant rooms, wash bays and equipment exteriors carry heavier oil and grease. Here a concentrated water based degreaser is usually the workhorse, because you can dilute it to suit the soil and use it with a mop, scrubber or spray.

Hammersley HD Degreaser is a non-caustic, water based heavy duty surface cleaner and degreaser. It contains no petroleum solvents or caustic alkalis, is biodegradable and non-flammable, and is listed for engine degreasing, machinery maintenance and hard industrial floors.

Hammersley Aquatron is a water based degreaser concentrate described as non-toxic, non-flammable, biodegradable and petrochemical free. Its listed applications include heavy machinery, factory and workshop floors, hard surface degreasing, and restoration and commercial cleaning work.

Hammersley Workshop Genie is a water based citrus degreaser aimed at workshop floors, engine bays, machinery and other heavy oil and grease areas. It can be applied by mop, spray or wash-down system and is non-flammable.

Heavy commercial grease and very tough soil

Some jobs need more push: commercial kitchens, heavy industrial floors, and areas where grease has built up over years. That’s where a high-pH product comes in.

Actichem Rhino is a concentrated heavy duty degreaser with a pH of 14 and a Class 8 corrosive classification. The product page gives light cleaning dilutions of 1:120 to 1:80 and heavy cleaning dilutions of 1:50 to 1:20, and lists natural stone, ceramic and porcelain, and concrete and masonry as compatible surfaces when diluted correctly. Treat it with the respect any corrosive deserves: correct PPE, correct dilution, and no guessing.

Hard floors that need a regular clean

Not every floor needs a heavy hit. For tiled and sealed floors in commercial kitchens or workshops, a floor cleaner with degreasing power may be all you need.

Actichem Surface Clean HD is a floor cleaner and degreaser with a pH of 10.5 and a stated dilution of 1:50 (20 ml per litre) to 1:100 (10 ml per litre). It’s listed for tile and grout floors, commercial kitchens, industrial and workshop floors, and general hard surface cleaning.

Mechanical parts and components

Pump housings, extractor fittings and other parts pulled off equipment during servicing are a different job again.

Hammersley Parts Washer Degreaser is a water based, solvent free concentrate made for recirculating parts washers, manual soaking or brushing. The product page says it dilutes up to 1 part concentrate to 4 parts water and is safe on metals, most plastics, rubber and painted surfaces.

Hammersley NF Brake & Parts Cleaner is a non-flammable solvent cleaner that evaporates fast and leaves no residue or lubricating film. It comes as a 400g aerosol with a 360-degree valve and extension tube, or in larger liquid packs. Hammersley notes it suits metals and most plastics and recommends testing sensitive materials first.

Read the label: pH, dilution and surface limits

Three numbers and notes on the label tell you most of what you need.

pH. The higher the pH, the more aggressive the cleaner is on fats and oils, and on skin and some surfaces. A pH 14 product like Rhino is a different animal from a non-caustic water based cleaner. Match the strength to the soil, and step down if a gentler product does the job.

Dilution range. Concentrates are economical, but only if they’re mixed properly. Pour by eye and you’ll either waste product or under-clean and rework the area. Use a measuring jug or a dosing bottle, and write the ratio on the spray bottle or bucket so everyone uses the same mix.

Surface limits. Check what the product is not suitable for. Aquasolve excludes aluminium, non-ferrous metals and polymer coated flooring. Most product pages advise a test patch on paint, plastics and sensitive finishes. On a restoration job a damaged surface becomes your problem, not the chemical’s.

Every one of these products has a safety data sheet, and the SDS is the controlling document for PPE, storage and first aid. If anyone on the crew isn’t confident reading one, our guide on how to read a safety data sheet in Australia walks through each section.

Quick break and where your wash water goes

Several of the Hammersley degreasers in this guide, including HD Degreaser, Aquatron, Workshop Genie and Parts Washer Degreaser, are described as quick break. In plain terms, the product holds oil in suspension while you’re cleaning and then lets it separate from the water afterwards. That matters if your depot or client site runs an oil and water separator or a wash bay with a treatment system.

If you’re washing down a workshop floor or an equipment bay, ask where the water drains before you start. Quick break formulas are designed to work with separation systems; they don’t make oily wash water safe to send down a stormwater drain.

Protect the people doing the cleaning

Degreasers are made to strip oil, and skin is oily. Even milder water based products dry out hands over a day of use, and caustic products can burn.

  • Wear gloves suited to the chemical for any concentrate work, as listed on the SDS. Our nitrile gloves guide explains why splash protection is not the same as a chemical-rated glove.
  • Use eye protection when mixing or spraying, especially with corrosive products.
  • Ventilate enclosed rooms, particularly when using solvent aerosols.
  • Keep decanted product in labelled containers. An unlabelled spray bottle of pH 14 degreaser is an incident waiting to happen.

A simple degreaser kit for the van and depot

Most restoration and cleaning businesses don’t need ten degreasers. They need three or four that cover their actual jobs.

Job What to reach for Example from RW
Soot and smoke residue, occupied homes Plant-based or caustic-free restoration degreaser Benefect Atomic Degreaser, Actichem Aquasolve
Workshop floors, machinery, equipment exteriors Water based heavy duty concentrate Hammersley HD Degreaser, Aquatron, Workshop Genie
Heavy commercial grease, tough industrial soil High-pH concentrated degreaser Actichem Rhino
Routine tile and sealed floor cleaning Floor cleaner with degreasing power Actichem Surface Clean HD
Parts and components during servicing Parts washer degreaser or non-flammable solvent cleaner Hammersley Parts Washer Degreaser, NF Brake & Parts Cleaner

Keep the concentrates at the depot, decant labelled working-strength bottles for each vehicle, and stock wipes and rags alongside. Our guide to cleaning rags vs microfibre cloths covers which to use for wiping down degreased surfaces.

Common mistakes to avoid

  • Using the strongest product for everything. A pH 14 degreaser is overkill for a lightly soiled tiled floor and harder on surfaces and skin.
  • Letting product dry on the surface. Work in sections, keep the surface wet for the dwell time on the label, then rinse or wipe.
  • Skipping the test patch. Painted panels, aluminium, plastics and coated floors can all react badly to the wrong chemical.
  • Mixing chemicals. Never combine degreasers with other cleaners, acids or disinfectants in the same bucket or sprayer.
  • Ignoring the wash water. Know where it goes before you start hosing.

Stock the right degreaser for the job

The best degreaser is the one that lifts your soil at the lowest strength that works, on a surface it’s safe for, with wash water you can manage. For restoration crews that usually means a restoration-focused degreaser for soot and occupied homes, a water based concentrate for floors and equipment, and a stronger product kept for the genuinely heavy jobs.

Browse the degreasers above on Restoration Warehouse, check the product label and SDS for your surface, or get in touch with the RW team if you’re not sure which suits your work.

Share Article:

Contact Us

Send a message or call us directly, we’ll get back as soon as possible

Contact Us

Complete the form to request a quote, book a service, or ask a question

Fields marked * are required.