Fiberlock IAQ 6000 Mold Resistant Coating White Acrylic Mold Resistant Sealer 18.9L

Fiberlock IAQ 6000 Mold Resistant Coating is a 100% acrylic, water based protective coating formulated to resist mold growth on dry film surfaces. It provides a durable, flexible and breathable finish suitable for restoration and remediation environments.

Key benefits

• Resists mold growth on coated dry surfaces
• Durable 100% acrylic flexible coating system
• Breathable film allows moisture vapour transmission
• Tintable white finish for site matching
• Suitable for porous and non porous substrates
• Tested to ASTM G-21 and ASTM D-3273 standards

Applications

• Mold remediation and prevention sealing
• Interior wall and ceiling restoration
• Wood, plaster and wallboard protection
• Concrete, masonry and block sealing
• Primed and galvanised metal surfaces

Features

• Water based acrylic formulation ready to use
• Fungistatic additive for surface mold resistance
• Can be applied by brush, roller or airless spray
• Recoat time approximately 4 hours
• Touch dry approximately 1 hour
• May require two coats on porous surfaces
• Clean up with warm soapy water
• Non combustible formulation
• Low VOC formulation at 65 grams per litre
• Water vapour permeance rating of 3.7 perms

Why choose this product

Used by restoration professionals where long term mold resistance and breathable surface protection are required after remediation or building repair works.

Specifications

• Volume: 18.9 litres
• Product type: Mold resistant acrylic coating
• Colour: White, tintable
• Chemistry: 100% acrylic water based system
• Coverage: 250 to 400 sq ft per gallon smooth surfaces
• Coverage: 150 to 300 sq ft per gallon porous surfaces
• Drying time: 1 hour touch dry
• Recoat time: 4 hours
• Minimum application temperature: 10°C
• Shelf life: minimum 36 months unopened
• Viscosity: 90 to 95 Krebs units at 21°C
• VOC: 65 grams per litre
• Water vapour permeance: 3.7 perms
• Application tools: brush, roller, airless spray
• Spray pressure: 2000 to 3000 PSI
• Spray tip size: 0.019 to 0.021 inch
• Compatibility: wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal, galvanised metal