Grout Restore 20

PHOSPHORIC ACID CLEANER FOR HARD SURFACES

Product Description

Grout Restore 20 is a phosphoric acid based cleaner for hard surfaces.

Grout Restore 20 is a detergent boosted solution containing 20% active phosphoric acid for the effective & economical removal of cement & grout residues, mineral scale build-ups and efflorescence. Its powerful blend of acids and penetrating agents provide tough action on general grime and is excellent for grout restoration.

Colour: Green
pH: 1 – 1.5
Fragrance: None
Dilution: Ready to use – 1:4
Safety profile: Non-hazardous
Pack sizes: 5Lt & 15Lt

BENEFITS

• Versatile Concentrate – by simply altering dilution ratios, Grout Restore 20 becomes a tough scale, scum and grime remover or an effective maintenance cleaner or neutralizer following strongly alkaline cleaning.
• Restoration Power – Grout Restore 20 has the muscle to tackle grout smear, cement residues, rust, efflorescence and years of scale and soap scum build-up. Specialty penetrating agents ensure quick and effective action saving you time and effort.
• Grout Specialist – helps overcome stubborn grout stains and embedded soils. Always use Grout Restore 20 to prepare grout ahead of applying grout sealer.
• Cleaning Systems – ideal for use in conjunction with professional hard surface cleaning equipment.

APPLICATION AREAS AND SURFACE SUITABILITY

Grout Restore 20 is phosphoric acid based cleaner for hard surfaces.

Grout Restore 20 is ideally suited for use on masonry surfaces, flooring and walls. Safe for use on all man-made tiles. Use with care on sandstone, quarry tiles, terracotta, grout and slate. Not recommended for use on acid sensitive surfaces including engineered stone, terrazzo, marble, limestone, granite and other natural stone. Avoid contact with all ferrous and non-ferrous metals.
Grout Restore 20 can be used almost anywhere that there are dirty tiles or concrete. Especially suited to builders cleans, restoration applications, washrooms, showers and pools.

HOW TO USE

Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Grout Restore 20 is a corrosive acid and care should be taken to ensure that gloves and eye protection are worn.

DILUTIONS

• Mineral scale build-up, efflorescence, cement residues & heavy duty applications – Use undiluted
• Grout residues & light duty applications – 1:4

APPLICATION

Mineral scale build-up, efflorescence, cement residues and heavy duty applications.

1. Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.
2. Scrub thoroughly with applicable nylon scouring/floor pad or brush
3. Allow 10 to 30 minutes reaction time and re-agitate
4. Extract/pick-up resultant slurry with extraction equipment
5. Neutralize remaining residues by rinsing thoroughly with a 1:300 solution (30ml/10Lt) of T&G Cleaner Pro or Proneutro.

Grout residues & light duty applications.

1. Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.
2. Scrub thoroughly with applicable nylon scouring/floor pad or brush
3. Allow 10 to 30 minutes reaction time and re-agitate
4. Rinse well with clean water.

Safety Data Sheet