Hypo Enforcer

MOULD REMOVER CHLORINE ADDITIVE

Product Description

Actichem’s Hypo Enforcer (AP727) is the core proprietary ingredients used to make Mould Exterminator the amazing product that it is. Packed into a convenient 1Lt pack.
The 1Lt Hypo Enforcer pack is like a nitrous boost to the chlorine power in Sodium Hypochlorite. On its own, Sodium Hypochlorite will only actually release a small percentage of its real power when applied to a mould affected surface. This is due to its in-built stabilisation mechanism as well as its poor wetting ability. When you add Hypo Enforcer, Sodium Hypochlorite comes alive. You will immediately extract every single atom of power out of the Chlorine molecule, and drive that power right down deep into the roots and hyphae of the mould and thoroughly destroy it.

MOULD
Hypo Enforcer + Chlorine’s unique, super-wetting formula, provides consistent, reliable results in mould remediation every time. It’s powerful stain removal can be seen almost instantly when applied to mould affected surfaces. Hypo Enforcer + Chlorine penetrates deep into the affected surface and completely destroys the mould hyphae and root system. This ensures a 100% clearance report on every mould remediation job.

BENEFITS

• Disinfects bio-contaminated surfaces.
• Kills mould (including roots and hyphae) and removes the staining.
• Penetration – To provide complete sanitisation of target surfaces, this powerful anti-microbial package has been combined with super-wetting technology. This enables the Hypochlorous Acid to penetrate faster and deeper into the inner-structure of fibre and porous substrates.
• Cleaning and Destaining – Actichem Enforcer also provide outstanding cleaning power to remove the accompanying organic grime.

APPLICATION AREAS AND SURFACE SUITABILITY

Ideal for use in uninhabited buildings, strip-outs, sub-floors, external walling, landscape structures, roofs and pathways.

SPECIFICATIONS

Colour: Light yellow
pH: 11.2 – 11.8
Fragrance: Lemon
Dilution: 1:15
Safety: Non-hazardous
Pack Size: 1Lt

HOW TO USE

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.

Special use notes:

• Do not use or allow contact on carpets, fabrics or sensitive surfaces.
• After cleaning and disinfection is completed, Actichem Biosan II can be applied as a post residual treatment for enhanced inhibition of fresh mould growth.
• Further information can be found in the Actichem Mould Dream Team booklet.
• Masonry and stone surfaces can be sealed with an Actichem penetrating sealer to prevent future mould growth.

DILUTION

Add 1Lt of Enforcer to 15Lt of 12.5% Sodium Hypochlorite (Pool Chlorine). Mix well.

APPLICATION

1. Remove and clean away all wet and dry debris.
2. Apply Hypo Enforcer – Chlorine solution to the affected area. Ensure all surfaces come into contact with the solution. Application can be by means of spray, mop or cloth.
3. Agitate areas with organic or mould build-up to promote complete removal of the bio-mass. Agitation will also aid mould and stain removal.
4. Allow a minimum of 1 minute dwell time for disinfection and 10 minutes dwell time for mould remediation.
5. Rinse thoroughly with clean water, where possible.
6. Repeating this process may be required for areas with heavy organic loading.

Safety Data Sheet