Performance Gold

THE BEST CARPET CLEANING PRESPRAY MONEY CAN BUY

Product Description

Performance Gold is a high performance carpet cleaning prespray.

Performance Gold is a unique blend of high performance surfactant chemistry, soil release agents and solvents which combine to provide grease cutting power normally only associated with high pH, heavy duty degreasers. The beauty is that whilst Performance Gold rips through the toughest of grime it cares for the carpet fibre at the same time and rinses freely to leave the carpet chemical free.

Colour: Dark red
pH: 9.5 – 9.8
Fragrance: Fruity
Dilution: 1:40 – 1:75
Safety profile: Non-hazardous
Pack sizes: 5Lt & 20Lt

BENEFITS

• Soil Suspension – Performance Gold employs a “no cost spared” selection of grease cutting agents to break through resistant soiling and specialty polymer technology to suspend the soils for effective rinsing.
• Tracked in Soils – Smart chemistry breaks down and suspends fine clays and atmospheric soiling. This is of particular benefit in areas where red soils are present.
• Fibre Safe – Is ideal for use on virtually all carpet fibres when used as specified. Meets the specifications for use on 5th generation stain resistant carpet.
• Ultra Concentrate – Super concentrate formula which allows it to be diluted to economical dilution ratios whilst still providing high performance cleaning.
• Safety First – Low VOC profile which means no unwanted, unpleasant vapours. This is complimented by it’s outstanding low toxicity and OH&S ratings. This formula also is phosphate free and does not contribute to the eutrophication of our waterways.
• A Pleasure to Use – Performance Gold has been designed for easy use through pump-up or hydroforce sprayers and fragrances the area with a fresh clean scent.

APPLICATION AREAS AND SURFACE SUITABILITY

Carpet cleaning

HOW TO USE

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.

DILUTIONS

Pump-up Sprayer

• Add 15-25ml per litre of water (1:40 – 1:75) depending on soil conditions.

Hydroforce High Pressure Model

• 1:9 tip (Yellow): Add 700ml – 1.2Lt into 5Lt Hydroforce container and fill with water.
• 1:32 tip (Brown): Dilute 1:1 with water or add directly into 5Lt Hydroforce container.

APPLICATION

1. Always prepare the carpet to be cleaned with thorough vacuuming.
2. Prespray the Performance Gold solution onto the carpet. Do not allow to dry.
3. Agitate & allow 5-10 minutes dwell time.
4. Extract rinse using Emulsifier Plus or Extracta Pro. For wool carpets, extract rinse using Rinse Pro.
5. Assist drying with air movers or similar if atmospheric conditions are humid.

Safety Data Sheet