Pet & Flood

FLOOD AND URINE DECONTAMINANT

Product Description

Pet & Flood is a unique spotting solution for high performance removal of cellulosic browning, urine stains and the associated odours. This innovative formulation combines a powerful urine crystal & stain removal blend with a 2-pronged microbiocidal chemistry specific to Urine decontamination and odour neutralization.

Colour: Yellow
pH: 1 – 2
Fragrance: Fresh lemon
Dilution: Ready to use – 1:4
Safety profile: Non-hazardous
Pack sizes: 500ml, 5Lt & 20Lt

BENEFITS

• Innovative Chemistry – Innovative formulation which provides total urine decontamination encompassing stain, odour and bacteria removal.
• Stain Removal – Carefully selected blend of low pH salts to neutralize the urine crystals and remove the stain from the fibre.
• Decontamination – Contains a blend of biocides which have been carefully selected to provide total elimination of bacteria such as E-Coli found in urine deposits.
• Browning Removal – Provides high performance removal of cellulosic browning caused by flood, excessive wetting and high alkalinity.
• Dynamic Penetration Feature – The inclusion of super wetting and penetrating agents ensure that Pet & Flood quickly and effectively wets out the fibres, carpet backing and even the substrate below to ensure total elimination of all areas which have been contaminated.
• Fibre Safe – Safe for use on all natural and synthetic fibres, however fine fabrics must be pre-tested for colour stability before use.
• User Friendly – Pleasant fresh lemon scent, low odour formula – pleasant to use.

APPLICATION AREAS AND SURFACE SUITABILITY

Carpets and fabric stain removal

HOW TO USE

Read and understand the SDS before use.
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.

DILUTIONS

Ready to Use – No dilution necessary.

APPLICATION

1. Remove by steam extraction as much of the flood water or urine spill as possible, doing extra dry vacuum strokes.
2. Apply Pet & Flood undiluted for severe contamination or dilute up to 1:4 for lesser effected areas.
3. Spray apply this solution onto the fibre or fabric until it is wetted out.
4. Agitate solution using a carpet rake or upholstery cleaning brush.
5. Allow 10 – 20 minutes reaction time.
6. Rinse extract using Actichem Rinse Pro.
7. Allow to dry. Assist drying by increasing ventilation.

Note: Some stubborn urine stains may require treatment using Peroxide (Spotaway U)

Safety Data Sheet