Fire restoration cleaning is a sequence, not a single product. Dry soot removal, wet cleaning, odour control and sealing each have a place. Skip the order and you smear carbon, lock odour into finishes, or seal over soil.
This guide is for Australian fire and smoke restoration crews. Soft links are to in-stock Restoration Warehouse products. No laser cleaning content — this workflow is mechanical and chemical.
The workflow in plain terms
- Safety and containment first.
- HEPA vacuum loose debris.
- Dry clean walls and ceilings where suitable.
- Wet clean / degrease remaining film.
- Address odour sources.
- Seal only where scope and cleanliness allow.
Dry cleaning and wet fire chemistry
Ezy Consumables Dry Cleaning Sponge 8 Inch – Smoke, Soot &… The Ezy Consumables Dry Cleaning Smoke & Soot Sponge 8 Inch is a dry-cleaning restoration sponge designed to lift smoke residue, soot and carbon dust from walls, ceilings and other delicate surfaces without water or chemicals. It is a practical tool for fire restoration,. Rotate faces often so you lift soot instead of pushing it into paint.
Fire Restore Among the Actichem fire-restoration chemicals, Actichem Fire Restore is a high-strength fire restoration cleaner that removes soot, smoke residues, and oily deposits from hard resilient surfaces. Move here when dry methods have taken the loose soil and a wet cleaner is needed for remaining smoke film.
Fire fix Actichem Fire Fix is a solvent- and caustic-free fire restoration cleaner that safely removes soot, smoke residues, and odours from delicate surfaces and fabrics. Keep it as a companion fire-cleaning option when the soil or surface calls for an alternative to Fire Restore.
Unsoot No. 1 Encapsulant Water based encapsulant that bonds soot particles and permanently seals smoke odours on ducts, timber, walls and ceilings after fire damage. Use encapsulants after cleaning when remaining residues need locking down — not as a shortcut over heavy soot.
Smoke odour sealers when the scope needs them
Fiberlock ULTRA Smoke Odour Sealer Coating RECON White Fire… Solvent free smoke odour and stain sealing coating that permanently encapsulates odours and blocks stains on multiple interior surfaces. White RECON-style sealers are for clean, prepared surfaces where odour sealing is specified — follow coverage and ventilation notes on the page.
Fiberlock RECON Smoke Odour Sealer 18.9L Fiberlock RECON Smoke Odour Sealer 18.9L Choose the RECON pack that matches the job specification; sealing is a finishing step, not a cleaning substitute.
Contents versus structure
Contents often need gentler dry cleaning and controlled wet cleaning. Structure may need more aggressive degreasing and, later, primers or sealers. Photograph pre-existing damage; smoke hides older stains that become claim disputes.
Odour after cleaning
If vapour control is still needed after soils are removed, pair this workflow with odour neutraliser selection. Fogging or neutralising over uncleaned soot rarely ends well.
What to look for when you buy
- A clear job fit on the label — soil type, surface and method stated plainly
- Dilution or ready-to-use directions you can measure on site
- Surface limits called out up front (stone, aluminium, dyes, sealed timber, electronics)
- An SDS the crew can read before the first spray or start-up
- Pack size that matches your real burn rate, not a one-off emergency buy
Common mistakes
Crews lose time when they skip a test patch, mix by eye, or expect one product to cover every soil. Another frequent miss: finishing chemistry before extraction or drying is under control, then blaming the chemical when the odour or soil returns. Match the product to the job stage, then document what you used.
Australian site realities
Power, water access, occupied buildings and insurer paperwork shape the choice as much as the catalogue page. A strong product still fails if you cannot rinse, extract or ventilate on the day. Stock the van for the jobs you actually win in your region, and keep a ranked consumables list so the first truck is not hunting supplies at 7 pm.
Temperature and dew point matter. Hot tin roofs, cold slabs and air-conditioned interiors change dwell times and drying behaviour. If the label gives a temperature range, respect it. If surface temperature is close to dew point, fix the air before you chase more chemistry.
Documentation that protects the crew
Photograph before and after. Note product name, dilution and pack used. Record moisture or hygiene readings when they justify scope. Clients and insurers ask later; memory is not a system.
When to stop or escalate
Stop if the surface is unidentified, colour bleeds on a test patch, a warranty demands a method you do not have, or contamination exceeds your PPE and disposal setup. Selling the right next visit beats forcing the wrong product on fire restoration cleaning.
Contents, structure and client communication
Separate the contents list from the structure list early. Soft contents often need gentler dry cleaning and controlled wet cleaning; structure may need more aggressive degreasing and later priming. Tell the client which rooms are in dry-clean-only scope that day so wet cleaning next door does not undo soot management. Photograph meter readings and pre-existing stains. Smoke hides old water marks and nicotine that become disputes once walls look “clean enough” in daylight.
Bottom line
Get the fire restoration cleaning decision right for the soil, the surface and the site constraints. Follow the live product page and SDS — not forum dilution folklore. Restoration Warehouse stocks the options linked above for Australian restoration and cleaning crews. Check live stock and current directions on each product page before you order; nothing here invents prices, kill claims or specs beyond those pages.
Van and depot discipline
Label concentrates and decants with name, dilution and date. Keep SDS with the product. Rotate older stock forward. If a pack arrives without a readable label, quarantine it — guessing chemistry or meter settings on a customer site is how claims start. Photograph label packs for the job folder when insurers ask what was used.
Training note for new technicians
Walk a new technician through one labelled mix or machine set-up under supervision before they work unsupervised. Have them write dilution, pad type or meter mode on the bottle or job sheet. A one-minute test patch on an inconspicuous area prevents most chemistry and finish mistakes. When the client or insurer asks what was used, a photo of the label pack in the job folder answers faster than memory.
Why the live product page beats forum tips
Forum dilution folklore and “we always run it neat” habits create damaged stone, bleeding carpet, burnt finishes and failed clearance cleans. The live Restoration Warehouse product page and the SDS are the authority for this catalogue. If a direction is unclear, ask before you spray, burnish or sample — a boring question is cheaper than a floor claim.
Procurement for owners and managers
Buy for a realistic two-week burn rate, not a single emergency. Split stock between depot and vehicles so storm nights do not empty the shelf. Prefer products with clear Australian SDS access and local replenishment through Restoration Warehouse rather than one-off unknown imports with no support. Re-check the live product page before promising a client a specific unit — stock and pack sizes move.
Related gear on the same van
Most fire restoration jobs fail because the supporting kit is missing: rinse water, recovery, PPE, meters or the next chemistry step. Build the kit as a system. Soft-sell only what you will actually use next week, and keep SDS packs with the concentrates or machines they belong to.