Fiberlock RECON Smoke Odour Sealer Clear Fire Smoke Odour Blocker Encapsulant 18.9L

Intro:
Fiberlock RECON Smoke Odour Sealer Clear is a water based, permeable encapsulating coating designed for fire and smoke restoration. It permanently seals residual odours and stains on building substrates while maintaining a breathable surface.

Key Benefits:

• Permanently encapsulates smoke odours in structural materials
• Blocks smoke and stain bleed through surfaces
• Maintains breathability without trapping moisture
• Suitable for multiple substrates including porous materials
• Reduces need for repeated odour treatment after restoration
• Supports long term odour control under changing environmental conditions

Applications:

• Fire and smoke damage restoration projects
• Wall cavities, ceilings and structural framing
• Ductwork and HVAC systems
• Residential and commercial building interiors
• Institutional and industrial restoration sites
• Areas with persistent smoke odour contamination

Features:

• Water based and non flammable formulation
• Highly permeable encapsulating technology
• Bonds to most building substrates
• Clear finish suitable for concealed or visible surfaces
• Can be applied in fiberglass lined and unlined ductwork
• Meets NFPA 90A and NFPA 90B requirements
• Tintable up to 2 oz universal liquid colorant per gallon
• Suitable for airless spray or brush application
• Not suitable for roller application
• Designed as final step in smoke odour management process
• Excellent stain blocking performance
• Interior use only

Surface Preparation:

• Surface must be thoroughly cleaned, dry and sound before application
• Recommended pre cleaning with appropriate RECON cleaners and odour treatments
• Odour encapsulation is the final stage after cleaning and neutralisation

Application Method:

• Apply using brush or airless spray equipment only
• Spray settings: 2200 to 3000 PSI
• Spray tip range: 0.017 to 0.023
• Brush type: synthetic, nylon or polyester bristle
• Roller application not recommended
• Apply one uniform coat, two coats may be required on porous or heavily stained surfaces

Coverage:

• Smooth surfaces: 200 to 400 square feet per gallon
• Porous surfaces: 100 to 200 square feet per gallon

Drying Times:

• Touch dry: 30 minutes at 70°F and 50 percent RH
• Recoat time: 4 hours at 70°F and 50 percent RH
• Topcoat allowed after minimum 24 hours drying

Topcoating Requirements:

• Light sanding and cleaning required before topcoat
• Use 100 percent acrylic latex coating with eggshell sheen or higher
• Do not use alkyd, enamel or oil based coatings
• Test patch recommended to prevent coating failure

Safety and Handling:

• Store between 10°C and 32°C
• Do not apply below 50°F or on surfaces above 15 percent moisture content
• Ensure adequate ventilation during application
• Use NIOSH approved respirator when spraying
• Do not mix with other coatings or solvents
• Clean tools with warm soapy water before drying

Why Choose This Product:
Used by restoration professionals to permanently seal smoke odours and stains in structural materials as part of a complete fire damage restoration system, ensuring long term odour control and surface stability.

SPECIFICATIONS:

• Product type: smoke odour sealer encapsulant coating
• Brand: Fiberlock
• Product name: RECON Smoke Odour Sealer Clear
• Volume: 18.9 litres
• Base: water based
• Flammability: non flammable
• Application method: brush or airless spray only
• Spray pressure: 2200 to 3000 PSI
• Spray tip size: 0.017 to 0.023
• Coverage: 200 to 400 ft2 per gallon (smooth surfaces), 100 to 200 ft2 per gallon (porous surfaces)
• Drying time: 30 minutes touch dry at 70°F 50% RH
• Recoat time: 4 hours at 70°F 50% RH
• Topcoat time: minimum 24 hours
• Compatibility: drywall, timber, masonry, wall cavities, HVAC ductwork (fiberglass lined and unlined), porous and sealed substrates
• Tinting: up to 2 oz universal liquid colorant per gallon
• Standards: NFPA 90A and NFPA 90B compliant
• Roller use: not recommended
• Temperature range: 10°C to 32°C storage, minimum application 50°F
• Moisture limit: maximum 15 percent surface moisture