Fiberlock RECON Smoke Odour Sealer UltraWhite Fire Smoke Odour Blocker Encapsulating Coating 18.9L

Intro:
Fiberlock RECON Smoke Odour Sealer UltraWhite is a water based encapsulating coating designed for fire and smoke restoration. It permanently seals residual smoke odours and stains on structural surfaces while maintaining a breathable finish.

Key Benefits:

• Permanently encapsulates smoke odours in building materials
• Blocks stain bleed through on treated surfaces
• Maintains permeability without trapping moisture
• Reduces long term odour re-emission under changing conditions
• Improves restoration outcomes after fire damage
• Suitable for a wide range of structural substrates

Applications:

• Fire and smoke damage restoration projects
• Residential and commercial building interiors
• Wall cavities and concealed structural areas
• HVAC systems and ductwork
• Industrial and institutional restoration sites
• Areas affected by persistent smoke contamination

Features:

• Water based and non flammable formulation
• OdourLock encapsulation technology
• Highly permeable breathable coating
• Bonds to most common building substrates
• Suitable for fiberglass lined and unlined ductwork
• Meets NFPA 90A and NFPA 90B requirements
• Can be applied with brush or airless spray equipment
• Roller application not recommended
• UltraWhite finish for improved surface coverage visibility
• Tintable up to 2 oz universal liquid colourant per gallon
• Excellent stain blocking performance
• Designed for interior use only
• Final step in full odour management system

Surface Preparation:

• Surface must be thoroughly cleaned, dry and sound before application
• Recommended cleaning with RECON Heavy Duty Cleaner or Extreme Duty Cleaner
• Follow with odour neutralisation using RECON Extreme Duty Odour Counteractant
• Apply sealer only after complete cleaning and drying

Application Method:

• Brush: synthetic, nylon or polyester bristle
• Airless spray pressure: 2200 to 3000 PSI
• Spray tip range: 0.017 to 0.023
• Apply evenly and generously for full encapsulation
• Two coats may be required on porous or heavily stained surfaces
• Roller application not recommended

Coverage:

• Smooth surfaces: 200 to 400 square feet per gallon
• Porous surfaces: 100 to 200 square feet per gallon

Drying Times:

• Touch dry: 30 minutes at 70°F and 50 percent RH
• Recoat time: 4 hours at 70°F and 50 percent RH
• Minimum 24 hours before topcoating

Topcoating Requirements:

• Light sanding and cleaning required before topcoat
• Use 100 percent acrylic latex coating only
• Eggshell sheen or higher required
• Do not use enamel, alkyd or oil based coatings
• Test patch recommended prior to full application

Safety and Handling:

• Store between 10°C and 32°C
• Do not apply below 50°F or above 15 percent surface moisture content
• Ensure adequate ventilation during application
• Use NIOSH approved respirator when spraying
• Clean tools with warm soapy water before drying
• Interior use only

Why Choose This Product:
Selected for professional fire restoration work where permanent smoke odour encapsulation and stain blocking are required across structural surfaces and HVAC systems in demanding environments.

SPECIFICATIONS:

• Product type: smoke odour sealer encapsulating coating
• Brand: Fiberlock
• Product name: RECON Smoke Odour Sealer UltraWhite
• Volume: 18.9 litres
• Base: water based
• Flammability: non flammable
• Colour: UltraWhite, tintable up to 2 oz universal liquid colourant per gallon
• Application method: brush or airless spray only
• Spray pressure: 2200 to 3000 PSI
• Spray tip size: 0.017 to 0.023
• Coverage: 200 to 400 ft2 per gallon (smooth surfaces), 100 to 200 ft2 per gallon (porous surfaces)
• Drying time: 30 minutes touch dry at 70°F 50% RH
• Recoat time: 4 hours at 70°F 50% RH
• Topcoat time: minimum 24 hours
• Compatibility: drywall, masonry, timber, wall cavities, HVAC ductwork (fiberglass lined and unlined), porous and sealed substrates
• Standards: NFPA 90A and NFPA 90B compliant
• Roller use: not recommended
• Temperature range: 10°C to 32°C storage, minimum application 50°F
• Moisture limit: maximum 15 percent surface moisture